Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Nampa, ID
Chimney repair in Nampa usually starts with a problem the homeowner can already see or smell: a cracked crown, a rusty cap, a flue that no longer drafts properly, or water stains spreading across the ceiling near the chimney chase. Much of the housing here is post-war and late-20th-century, with a large share of manufactured homes and older farmhouses on the edges, and many of those have factory-built metal chimneys rather than masonry fireplaces. That changes the job. Repair work on a prefab flue is a different set of parts and decisions than patching a brick stack, and it has to be inspected before anyone recommends a fix. We handle chimney sweeping, chimney repair and dryer vent work as one specialty. Call (888) 854-6163 for a free estimate.
Why Nampa Homes Are Different
Nampa burns wood. The Treasure Valley has a long heating season and a real wood-heat and stove-retrofit culture, so a lot of homes here run a stove or fireplace through the cold months as supplemental heat, and some as the main heat source. Heavy use builds creosote fast. Combine that with a housing mix that leans on factory-built metal chimneys, aging stovepipe and older prefab flues instead of masonry, and the work tilts toward inspecting and re-certifying those systems rather than simply sweeping a brick flue.
On the city’s edges and in the mobile-home parks, technicians routinely find undersized or aging prefab flues, and third-degree creosote from burning the region’s softwoods and scrap wood instead of seasoned hardwood. That kind of glazed, tar-like deposit does not brush off cleanly the way light soot does, and it is the reason a sweep here is also an assessment. Summers bring dry heat and the occasional high-wind and dust event, which puts a premium on cap and gasket checks before the first cold snap. Add the high-desert cold, and the equipment has to be sound before you rely on it all winter.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Nampa Services
Two jobs come up most often when Nampa homeowners call us.
Chimney Sweep in Nampa
In Nampa, a sweep is rarely just a brush and a shop vac. Because so many homes here heat with wood stoves feeding factory-built chimneys, the visit includes a look at the flue type, the condition of the pipe joints, and how much creosote has actually built up. Heavy softwood burning leaves glazed deposits that need proper removal, and the inspection tells us whether the system is safe to keep running through the winter. We clean, we assess, and we show you what we find. If it is time for a cleaning, you can book Chimney Sweep in Nampa and get an honest picture of your flue.
Dryer Vent Cleaning in Nampa
A clogged dryer vent is a fire risk, and it is one homeowners rarely think about because the dryer still runs. In Nampa’s older homes and manufactured housing, vents can be long, partly crushed, or routed through spaces nobody has looked at in years. Lint accumulates in those runs and restricts airflow, which makes the dryer work harder and run hotter. We clean the full run and check the exterior termination, which matters here when wind and dust can block a hood. For a home with a wood stove and a dryer, this is the second half of the fire-safety picture. Book Dryer Vent Cleaning in Nampa and get both systems checked.
Chimney Repair in Nampa
Chimney repair in Nampa sits at the intersection of heavy wood-heat use and a housing stock full of factory-built metal chimneys. Homes on the outskirts, in mobile-home parks, and in the older farm-era houses around the valley often run wood stoves through long, cold winters, and many still have original or aging prefab flues. That means the repair work here is as much about re-certifying and restoring prefab and stovepipe systems as it is about patching masonry. We handle the full scope, from a new cap to a full liner installation, and we use professional-grade components from brands like DuraFlex and HeatShield so the fix holds up. If you want the broad overview of what we do, start with Chimney Repair and then call us to look at your specific system.
Chimney Cap Installation
A proper cap keeps rain, snow, birds and debris out of the flue and protects the top of the chimney from weather.
Signs you need it
You see an open, uncapped flue from the ground, or water is getting in after storms and you have no cap or screen in place.
What it costs in Nampa
Cap installation typically runs $150 to $450 depending on the flue type and cap style.
How we do it
We measure the flue, match a cap to the pipe or masonry opening, and secure it so it sheds water and stays put through high-wind events.
Chimney Cap Replacement
Nampa’s dust and wind events wear on caps over time, and a rusted or loose cap should be swapped before the heating season.
Signs you need it
Your cap is rusted through, bent, missing a screen, or rattling in the wind and no longer sealing the flue top.
What it costs in Nampa
Replacement usually falls in the $175 to $500 range, depending on condition and the style of cap that fits your flue.
How we do it
We remove the old cap, check the flue top and crown for damage, and install a properly fitted replacement with the right clearances.
Chimney Liner Installation
A sound liner is what keeps flue gases inside the chimney and away from the structure, and many prefab systems here are due for a new one.
Signs you need it
The flue is cracked, rusted, or undersized for the appliance, or the original prefab liner has failed and no longer protects the chase.
What it costs in Nampa
Liner installation typically ranges from $2,500 to $6,500 depending on the flue length and appliance type.
How we do it
We inspect and measure the flue, then install a DuraFlex flexible liner sized to the appliance and connect it to a cap and top plate.
Chimney Flashing Repair
Flashing is the metal where the chimney meets the roof, and it is the most common entry point for leaks in Nampa homes.
Signs you need it
You spot water stains near the chimney on the ceiling, or you can see gaps, loose metal or rust at the roof line.
What it costs in Nampa
Flashing repair is typically $300 to $900 depending on access and how much of the flashing needs to be rebuilt.
How we do it
We clear the old sealant, inspect the roof deck around the chimney, and re-form or replace the flashing with proper overlap and sealing.
What Chimney Repair Costs in Nampa
Every repair is quoted per job, and the written estimate you get before work begins sets the final price. These are typical ranges for the work we do here.
| Item | Typical range in Nampa |
|---|---|
| Chimney cap installation | $150-$450 |
| Chimney cap replacement | $175-$500 |
| Chimney liner installation | $2,500-$6,500 |
| Chimney flashing repair | $300-$900 |
Can you fix a failed prefab chimney in Nampa?
Yes. Most Nampa prefab systems can be repaired or relined rather than torn out. We inspect the flue, confirm what failed, and install a compatible liner or components matched to the appliance.
Do I need a permit to repair a chimney in Nampa?
Many repairs do require a permit, especially a liner replacement or structural work. Ask the city’s building department what applies to your address, and we will work with whatever the job needs.
Brands We Service in Nampa
We work with professional-grade components from HeatShield for ceramic flue resurfacing, DuraFlex for flexible liner systems, and Copperfield for caps and related parts. We do not claim to stock these locally; we specify and install the right parts for your system, and material lead time shapes turnaround on a given job. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Nampa, ID
These are typical ranges for common work in Nampa. Your written estimate sets the final price before anything starts.
| Service | Typical range in Nampa |
|---|---|
| Chimney cap installation | $150-$450 |
| Chimney cap replacement | $175-$500 |
| Chimney liner installation | $2,500-$6,500 |
| Chimney flashing repair | $300-$900 |
| Chimney crown repair | $300-$1,000 |
| HeatShield flue resurfacing | $1,200-$3,500 |
| Chimney sweep | $150-$350 |
| Dryer vent cleaning | $125-$275 |
| Chimney inspection | $150-$400 |
Price moves with access, flue length, and how much damage a system has taken – a roof with steep pitch or a long prefab run costs more than a straight one. In Nampa, heavy creosote removal and prefab re-certification also add to the job. We give you the number upfront in writing so there are no surprises.
Neighborhoods We Serve in Nampa
We work across Nampa, from the older core out toward the edges where a lot of wood stoves and factory-built chimneys are in use. Whether you are near downtown or out in the mobile-home parks and farmhouse properties, we book your visit and confirm timing when you call. Typical turnaround across the city is a few business days, and we will tell you what we can do when you reach us.
- Downtown Nampa
- North Nampa
- South Nampa
- East Nampa
- West Nampa and the rural edges
Service Area – Cities Near Nampa
Nampa sits in the middle of the Treasure Valley, so we also take calls from homeowners in the cities around us. If you are just outside Nampa or in a neighboring town, we can still help. We cover Meridian, ID to the east and Boise City, ID to the northeast, along with the communities in between. Call and tell us where you are, and we will let you know how we can get to you.
Serving Nampa, ID – Our Local Coverage Area
We serve Nampa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Nampa
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Timing depends on the season and how booked the schedule is, so call and we will confirm the next opening for your Nampa home.
Often yes, particularly for a liner replacement or structural work. Permit rules vary by address, so check with the city’s building department. We will tell you what the job involves and work with whatever permit applies.
Yes, we cover the surrounding Treasure Valley, including nearby towns and rural properties on the edges. Call with your address and we will confirm whether we can reach you and when.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Nampa Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Wade Sutton"Good work. Would use again."
- Tara Mercer"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Brooke Walsh